GL Announces Monitoring Clock or Frame Slips on T1 or E1 Lines

Gaithersburg, Maryland (PRWEB) September 12, 2012

GL Communications Inc. announced today the release of its latest T1 E1 Hardware product feature Clock Slip Measurement which monitors Clock and Frame Slips on T1 E1 Lines.

Speaking to reporters, Mr. Jagdish Vadalia Senior Manager of the company said, In a network, all switches use a single timing signal to transmit all signals in the outbound direction. This single timing is always derived directly from a single common reference timing signal available network wide. However, incoming signals may have timing variations due to propagation variations, re-clocking jitter, wander, frequency drift, etc. Due to this timing difference between transmit vs. receive signals; the network equipment may suffer an impairment by replicating data or deleting data. This is referred to as a Timing, Clock, Bit, or Frame Slip.

He added, Clock Slips are a count of the difference between a reference T1 E1 clock and another T1 E1 signal being measured. A Clock Slip is a one-second-interval measurement (accuracy of the timing slips is +/- 1 count) that arise because of phase differences or frequency differences of the incoming signal vs. the outgoing signal timing (the reference). Enough clock slips (usually counts reaching 192 or 193) create a frame slip, and eventually, loses or repeats data.

Mr. Vadalia explained, GLs T1 E1 Analyzer can measure Clock Slips between two T1 E1 timing signals. Different modes of Clock Slip that can be measured by T1 E1 hardware are:

Internal Clock Slip Reference:This Clock Slip measurement compares the incoming receive clock from the port against the internal clock provided by the unit. The software compares the internal counter to the recovered clock counter by storing these counts.

Crossport Clock Slip Reference: This Clock Slip measurement compares the incoming receive clock from Port #1 against the incoming receive clock from Port #2 using the Recovered Clock on Port #1 and Recovered Clock on Port #2.

External Clock Slip Reference:

GL Announces Monitoring Clock or Frame Slips on T1 or E1 Lines